Verslun

Show all

BÍLALYFTA 2 PÓSTA 3,5T 2 MÓTOR

811.542kr.

Á lager

Vörunúmer: VY4EC1800 Flokkur:
Most versatile 2 post lift on the market (Wide, realiable and 100% manufactured in Spain).
Spindles steel quality to F114 (F114 has more carbon that adds strength and less manganese, reducing its elasticity)
Painting by nanotechnology
Working nut GSM (nylatron of high strength giving reduction in wear)
High efficiency motors 2,4Kw and low consumption, max. <0.12 Amp. Safety system against chain breakage or carriages running out of level. Electrical Components used are high quality OMRON, reducing wear on electronic board and minimizes short circuits. Robust and reliable Rolled threads of the threaded adjustable height pads for – Maximum Performance and longer wear life. Noise reduction by using higher quality materials Increased robustness of arms with structural tube New, stronger Arm locking systems, more robust (complies with lateral force test by the Health & Safety test and the GEA. lower tooth pitch and axle locks diam. 22) All welds are perfect by automatic welding robot Working Versatility: from Smart Car, Vito or VW Touareg Patented VULKOLLAN lifting pads. Diameter 120 mm. for more accuracy (lower friction and better wear behaviour) wider distance between posts for workplace ergonomics.

·“Plug&Play” electrical wire connections between columns are now by quick connector, for faster installation.
·New model follows HEALTH & SAFETY EXECUTIVE regarding arm locking system requirements.
·Diagnosis system SCS (alerts for maintenance, programming heights and component failures)
·Fitted Grease nipple: Now added to the base of the bearing spindle to minimize friction and noise.
·New Radial locking system maximum 35KN: Carriage & components manufactured in F114 strong steel for minimum wear,
·Load Nut wear indicator: Maximum wear by indicators utilising simple colour ID.
·Adjustable height lifting pads as standard. Our lifting pad threads are “Rolled thread” exactly like the screws, gives maximum performance and longer wear life.
·New, stronger Arm locking system, more robustly designed and manufactured.
·Complies fully with the lateral force test conducted by the Health & Safety executive and the GEA.
·Locking system includes a smaller tooth pitch on the locks with the locking pins themselves manufactured from 22mm diameter steel (Steel F114).
·All welds are now perfect and completed by automatic welding robot.
·Lifting Pads of Patented VULKOLLAN. Diameter 120 mm. Gives more accuracy, lower friction and better wear pattern.

Width between columns 2795 mm
Load capacity 3500 Kg
Minimum height 95 mm
Lifting height 2000 mm
Lifting time 45”
Arm length (min-max) Short 620-1240 mm Long 925-1440 mm
Overall width 3490 mm
Column + Overhead conduit height 4040 mm
Motor 3 Phase 230/400 V 50/60 Hz.· 2 x 2.4 KW